3 - minute video
Metal Roofs
1) Prepare Surface
Tighten or replace loose fasteners. Remove scaling rust and pressure wash to achieve a clean, sound roof surface.
2) Encapsulate Corrosion as Needed
Apply ASTEC B-16-71 Rust Control specially formulated to neutralize and halt further metal roof corrosion.
3) Seal Fasteners
Tighten or replace any loose fasteners. Encapsulate every fastener with ASTEC WPM #9 fluid membrane to insure a watertight seal.
4) Seal Seams & Flashings
Reinforce all seams, flashings, and penetrations with high tensile strength fabric saturated with ASTEC WPM #9 fluid membrane, or use WPM #10 fiber-reinforced fluid membrane.
5) Apply First Layer
Apply the first layer of either ASTEC #900 Ceramic Finish, or ASTEC #2000 Finish for a tough, weatherproof membrane.
6) Apply Final Layer
Apply the second application of either ASTEC #900 or ASTEC #2000 Re-Ply finish to the roof. This results in a seamless, highly reflective "cool roof" that remains durable, weathertight, and pliable. Impervious to many airborne corrosives, ASTEC roofs have proven performance over 100's of millions of square feet.
This is a typical system for metal roofs. Products and procedures may vary by roof type and condition. Only ASTEC detailed specifications will be approved on any ASTEC roofing project.
Request a Free Quote
© National Coatings Of Canada. 2013-14. All Rights Reserved.
Protective Roof Coatings in Southern Ontario | Exterior Ceramic Coatings Company | Leaking Rusty Metal Roof Ontario | Fluid-applied Membrane Roof Systems Ontario | Roof Coatings Company in Ontario | Fluid Applied Roof Coatings Ontario | National Coatings of Canada Inc | Sitemap | Feed
Powered By:www.alphabusinessdesigns.com
